16
INTRODUCTION: Configuration
6
Printer feed button
Hold down this button to feed the printer paper.
7
Pilot lamp
Indicates that the station is turned on.
When the power is supplied by the battery pack, the pilot lamp lights up when
is pressed to turn
on the power.
It remains lit when connected to AC power supply.
8
Battery power button
Turns on or off the station when it is powered by the battery pack. To turn off the device, hold down
the button for more than a second.
To power the station by the battery pack, turn off the station main power switch and insert a charged
battery pack to the battery slot. Then press
.
•
When the station is powered by the battery pack, the station will be automatically turned off by the auto
shutdown function if there is no operation or data transmission to the station for 5 minutes.
•
When the station is turned off (the pilot lamp is off) before using it, press
to turn on the power.
9
Main body battery charge indicator
Lights up when the battery pack is being charged within the main body. When charging is complete,
the light goes out.
If an error has occurred during charging, it blinks.
10
Station battery charge indicator
Lights up when the battery pack is being charged within the station. When charging is complete, the
light goes out.
If an error has occurred during charging, it blinks.
11
Spherical model eye storage space
Store the spherical model eye here. Insert the spherical model eye on its side.
12
Spherical model eye measuring holder
Stand the spherical model eye here for measurement.
“4.2.3 Measurement accuracy check” (page 109)
13
Occluder holder
Place the occluders here when they are removed from the main body.
