114
SPECIFICATIONS AND TECHNICAL INFORMATION: Specifications
•
Power specification
Battery pack
Lithium-ion battery (7.2 V 1800 mAh)
Station feed
DC 9 V 2 A (maximum)
•
Dimensions and mass
Dimensions
206 (W) × 181 (D) × 224 (H) mm (including occluders)
Mass
998 g (including battery pack)
Station
•
Printer
Thermal line printer with auto cutter (printer-equipped model only)
•
Interface
USB: One port, LAN: One port, RS-232C: One port (printer-equipped model only)
•
Battery charging
Battery pack
Lithium-ion battery (7.2 V 1800 mAh)
Charging time
When inserted in the main body: Approx. 180 min.
(when the main body is placed on the station)
When inserted in the battery slot: Approx. 140 min.
•
Power specification
Voltage, frequency
AC 100 to 240 V ±10% 50/60 Hz
Power consumption
60 VA (maximum)
•
Dimensions and mass
Dimensions
224 (W) × 283 (D) × 147 (H) mm
Mass
2.7 kg (printer-equipped model)
2.5 kg (model without printer)
Wireless LAN
The wireless LAN module incorporated in this device conforms to the regional regulations of Japan, the USA,
Canada, Singapore, and the RE Directive. When using the wireless LAN, follow the radio law of respective
countries.
The following labels indicate the Dealer’s individual license in Singapore.
•
Standard
IEEE802.11b/g, IEE802.11n
•
Transmission method
• Orthogonal frequency-division multiplexing (OFDM)
• Direct-sequence spread spectrum (DS-SS, CCK)
•
Frequency
2.4 to 2.5 GHz (ISM band: 1 to 13ch)
* USA and Canada: 1 to 11ch
•
Effective radiated
power
5.69 mW
•
Link rate
IEEE 802.11n
6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps
IEEE 802.11g
6, 9, 12, 18, 24, 36, 48, 54 Mbps
IEEE 802.11b
1, 2, 5.5, 11 Mbps
•
Access method
Infrastructure mode and AD HOC mode
•
Security
• Infrastructure mode: WPA, WAP2, WEP (64/128 bit)
• AD HOC mode: WEP (64/128 bit)
Complies with
IMDA Standards
DA107766
Complies with
IMDA Standards
DA107769
Complies with
IMDA Standards
DA107746
