Summary
Preface
P. 6
Chapter 2
P. 17
Technical data
Chapter 5
P. 76
Reception, storage
and installation
Chapter 4
P. 54
General information
Chapter 3
P. 47
Application notes
Chapter 6
P. 115
Options
Chapter 7
P. 129
Preventive maintenance
Chapter 1
P. 15
Overview
and installation diagram
Answer Drives 1000
65
4
4.3.7 DANGEROUS ZONES
The AD1000 is designed to be built/installed/assembled in another
machine/equipment/assembly/system and used by personnel properly
trained and qualified to its incorporation/installation and use and that is
aware of the requirements and rules related to electrical work (in low and
medium voltage), the laws and technical standards governing such work
and the risks present.
The AD1000 is characterized by parts considered dangerous for the
presence of electrical, thermal or energy risk; all areas considered
dangerous have been segregated in order to prevent access when the
AD1000 is in operation, including its power on and power off.
Access to the AD1000 must be prevented to general staff through safety
prescriptions set out by the laws in force: it can be allowed only to
specifically trained personnel, who demonstrates adequate knowledge
of the AD1000 operation, of how to stop and put all the power supplies
of the system in which the AD1000 is integrated/built/installed, in safe
conditions, of the location and operation of all local and remote controls
and must well know the process, the operating sequences and the risks
related to them.
It is also essential that the technical personnel authorized to access the
AD1000 has full knowledge of this manual and the manuals of the
system/equipment/machine of which the AD1000 is part; therefore
the operator must have fully read this manual and all the User and
Maintenance Manuals of the machine/system/assembly in which the
AD1000 is incorporated/installed.
DANGER
To access and operate in dangerous areas, it is necessary to observe the
safety regulations contained in this chapter and carry out all operations in
accordance with the instructions contained in this manual, following the
methods provided and specified herein.
Access to dangerous areas is restricted to personnel authorized and
specialized in carrying out these operations, who is provided with
adequate electrical qualifications (EN50110-1) and the technical
knowledge for low and medium voltage equipment and systems.
Appropriate prevention and protection measures have been established and
prescribed in order to limit the risks for interventions in dangerous areas;
it is compulsory to comply with the requirements contained in this Manual
relating to “personal protective equipment” (PPE), with the procedures and
methods to follow for interventions on the AD1000.
DANGER
The various risk factors that may be present in the incorporation,
commissioning, operation and maintenance steps, and the relevant
prevention and protection measures, have been evaluated during the
AD1000 design; these measures are prescribed in this manual and must be
observed by all personnel performing work on the AD1000.
4.3.7 DANGEROUS ZONES
Summary of Contents for AD1A008FBBNH
Page 138: ......
