Summary
Preface
P. 6
Chapter 2
P. 17
Technical data
Chapter 5
P. 76
Reception, storage
and installation
Chapter 4
P. 54
General information
Chapter 3
P. 47
Application notes
Chapter 6
P. 115
Options
Chapter 7
P. 129
Preventive maintenance
Chapter 1
P. 15
Overview
and installation diagram
Answer Drives 1000
6
MANUFACTURER
Your Answer Drives 1000 was manufactured at the Nidec ASI S.p.A.
factory in Montebello (VI) - Italy
MANUFACTURER’S ADDRESS
Any request for after-sales support at the Buyer/Customer or any request
for clarification regarding technical aspects contact the nearest Nidec
Technical Service Center.
For any kind of information or clarification regarding use, maintenance,
installation, etc., the Manufacturer is always available to meet the requests
of the Purchaser/Customer.
When asking for clarifications please make sure you have the data from
the nameplate available as i twill be required to correctly identify the
product. The nameplate is located on the back of the product.
Additional information on the product can be found
at nidec-answerdrives.com
WARRANTY AND LIMITATIONS OF LIABILITY
For the warranty period and the conditions, refer to the Order Acceptance.
The manufacturer is not liable for damage caused during transport,
receiving, installation or commissioning.
The manufacturer is not liable for damage or consequences resulting from
inappropriate, negligent or incorrect installation of the drive, incorrect
setting of the operating parameters of the drive, installation in dusty
environment, with corrosive substances, excessive vibrations or operating
temperature outside the rated data.
The customer is obliged to buy original spare parts, otherwise
the guarantee will be void.
The manufacturer declines all responsibility for any damage caused by the
AD1000 to people, animals or objects in the following cases:
• Incorrect use or for purposes other than those for which it was made
• Incorrect incorporation/installation in the machine, system or equipment
to which it is intended
• Failure to follow the installation/incorporation rules given in this Manual
• Use and/or implementation of tasks by unqualified or unauthorized
personnel
• Defects in electrical, hydraulic, pneumatic, water supplies (if present)
• Failure to comply with the technical specifications related to the supplies
listed in Chapter 2 of this Manual
• Lacking or insufficient periodic maintenance
• Modifications or interventions on equipment not agreed and not
authorized by the Manufacturer
• Use of spare parts that are not original or other than those specified
• Total or partial non-compliance with the instructions contained in
this manual.
Compliance with the safety rules in this manual is the responsibility of
those who organize and manage the tasks planned for the AD1000 who
must ensure that the personnel involved:
• is qualified to perform the required tasks
• knows and observes with due attention the rules contained in
this Manual
• knows and applies all the general and specific safety rules applicable
to the AD1000.
Failure to follow the safety rules can result in injury to people and damage
to the AD1000.
MANUF
ACTURER - MANUF
ACTURER’S ADDRESS - W
ARRANTY AND LIMIT
ATIONS OF LIABILITY
Summary of Contents for AD1A008FBBNH
Page 138: ......
