Summary
Preface
P. 6
Chapter 2
P. 17
Technical data
Chapter 5
P. 76
Reception, storage
and installation
Chapter 4
P. 54
General information
Chapter 3
P. 47
Application notes
Chapter 6
P. 115
Options
Chapter 7
P. 129
Preventive maintenance
Chapter 1
P. 15
Overview
and installation diagram
Answer Drives 1000
13
TERMS AND ACRONYMS USED
EXPOSED PERSON: (Annex I, 1.1.1-c Directive 2006/42/EC).
Any person wholly or partially in a danger zone.
INTENDED USE: (Annex I, 1.1.1 h-Directive 2006/42/EC).
The use of partly completed machinery in accordance with the information
provided in the instructions for use.
DANGER ZONE: (Annex I, 1.1.1-b Directive 2006/42/EC).
Any zone within and/or around the partly completed machinery where
the presence of an exposed person constitutes a risk to the safety
and health of that person.
RISK: (Annex I, 1.1.1-and Directive 2006/42/EC).
Combination of the probability and severity of an injury or damage to
health that can arise in a dangerous situation.
RESIDUAL DANGER: (Ref. EN 12100)
Danger that has not been possible to eliminate or reduce by design,
against which the protections are not (partially or totally) effective.
The Manual (Chap.4) shows the residual risks and the information,
instructions and warnings/requirements for the management of Residual
Risks that should be borne by the user.
PROTECTION DEVICE: (Annex I, 1.1.1-g Directive 2006/42/EC).
A device (other than a guard) which reduces the risk, either alone or
associated with a guard.
GUARD: (Annex I, 1.1.1-f Directive 2006/42/EC).
element of the partly completed machinery used specifically to provide
protection by means of a physical barrier.
PARTLY COMPLETED MACHINERY (Article 2 g-Directive 2006/42/EC).
An assembly which is almost a machinery but which cannot in itself
perform a specific application. A drive system is a partly completed
machinery.
A partly completed machinery is only intended to be incorporated
or assembled with other machinery or other partly completed machinery
or equipment, thereby forming a machinery in accordance with Directive
2006/42/EC.
WARRANTY
The general conditions are reported in detail in the Sale Contract.
In more general terms and however valid in any case it is emphasized that:
• Nidec ASI SpA. is not responsible for damage or malfunction in the event
of lack of maintenance, unauthorized replacement of parts of equipment
with non-original parts and use of the AD1000 other than as stated in
this User and Maintenance Manual.
• The guarantee does not include any liability for any direct or indirect
damages to persons and property resulting from misuse, from an
installation/integration that does not comply with instructions in this
Manual and in the regulations referred to in this manual and in case of
wrong or lack of maintenance of the AD1000.
AD1000 MANAGEMENT
The AD1000 management, which includes incorporation/installation,
operation, use, maintenance, cleaning, disassembly and dismantling, can
be carried out only by skilled and specialized personnel, who has adequate
knowledge in the electrical, electronic and mechanical field that has
been authorized and is duly trained and aware of all the risks related to
medium-voltage equipment.
The personnel in charge of the incorporation/installation, operation and
maintenance of the AD1000 should be aware that the knowledge and
application of safety rules is an integral part of their tasks.
The definition of expert person and of person designated to the
management of electrical systems is contained in the standard EN 50110-1
to which refer for further details.
DANGER
Unauthorized and unqualified personnel in accordance with EN 50110-1
can not access the area where the AD1000 is installed.
TERMS AND ACRONYMS USED - W
ARRANTY - AD1000 MANAGEMENT
Summary of Contents for AD1A008FBBNH
Page 138: ......
