Summary
Preface
P. 6
Chapter 2
P. 17
Technical data
Chapter 5
P. 76
Reception, storage
and installation
Chapter 4
P. 54
General information
Chapter 3
P. 47
Application notes
Chapter 6
P. 115
Options
Chapter 7
P. 129
Preventive maintenance
Chapter 1
P. 15
Overview
and installation diagram
Answer Drives 1000
136
7
7.6 AD1000 - PM006 DRIVE
METHOD 1
Drive stored (not operating) for less than two (2) years: Supply power
to the drive for the time shown in Figure 7.1. The drive reformats its
capacitors by itself.
Drives stored (not operating) for more than two (2) years: Use the
method 2A or 2B (see figures below).
METHOD 2A
Power the DC bus of the drive with a three-phase diode jumper in series
with a charge resistor as shown in Figure 7.2.
(P = Rectifier; R = Charge resistor ; C = Capacitor). Refer to Figure 7.1 for
the formatting time.
In the formatting phase the drive must be disconnected from
the power supply network.
7.6 AD1000 - PM006 DRIVE
Figure 7.1
Summary of Contents for AD1A008FBBNH
Page 138: ......
