Summary
Preface
P. 6
Chapter 2
P. 17
Technical data
Chapter 5
P. 76
Reception, storage
and installation
Chapter 4
P. 54
General information
Chapter 3
P. 47
Application notes
Chapter 6
P. 115
Options
Chapter 7
P. 129
Preventive maintenance
Chapter 1
P. 15
Overview
and installation diagram
Answer Drives 1000
72
4
4.8 ADDITIONAL DANGER REQUIREMENTS
DANGER
• Risk of death or electric shock!
• All work should be performed by qualified personnel.
• The electrical panel is connected to multiple power sources.
• Dangerous residual voltage is also present with open switches.
Wait 10 minutes before implementing the procedure for setting the
machine in safe conditions.
DANGER
Never change the protection settings determined by the Manufacturer.
DANGER
Never perform ordinary or extraordinary maintenance with the electrical
power supply circuits connected.
Always de-energize in advance all the power supply circuits.
DANGER
The AD1000 does not have interruption and/or circuit breaking devices on
the motor side and at the internal circuits.
All electrical connection terminals of the AD1000 must always be
considered energized except the control devices (not supplied by Nidec
ASI S.p.A.) of the installation in which the AD1000 is incorporated and/
or integrated, and must guarantee power supply interruption on the
motor side, medium voltage power supply side and safety grounding
connection.
DANGER
Operate on the motor only after checking that the AD1000 is fully
de-energized.
DANGER
The AD1000 does not have interlocks, extraction boxes or other safety
devices intended to isolate and ground the conductors coming from outside.
The AD1000 is connected to multiple electrical power sources.
These power sources can be mutually independent.
Before accessing any part of the AD1000 it is indispensable to stop,
disconnect, block and ground all power supplies connected to the AD1000.
4.8 ADDITIONAL DANGER REQUIREMENTS
Summary of Contents for AD1A008FBBNH
Page 138: ......
