Summary
Preface
P. 6
Chapter 2
P. 17
Technical data
Chapter 5
P. 76
Reception, storage
and installation
Chapter 4
P. 54
General information
Chapter 3
P. 47
Application notes
Chapter 6
P. 115
Options
Chapter 7
P. 129
Preventive maintenance
Chapter 1
P. 15
Overview
and installation diagram
Answer Drives 1000
58
4
4.3.1
GENERAL SAFETY REQUIREMENTS
The
AD1000
contains components sensitive to electrostatic discharge;
these components may be damaged if handled improperly. During
maintenance or replacement of the electronic boards, it is necessary to
take adequate protection against electrostatic discharge (ESD):
Use a maintenance kit for electrostatic charges.
• Wear properly grounded static straps.
• Handle the boards by the edges.
• Boards must not come into contact with highly insulating materials such
as plastic sheets, insulating surfaces, parts of synthetic fabrics.
• The boards will be placed on conductive surfaces.
• The boards must be packaged in conductive sheets before shipment.
• The IGBT modules are sensitive to electrostatic charges. Handle with care
to avoid damage. Do not leave open the gate-emitter control terminals.
Short circuit these pins with anti-static sponge or with a metal jumper
terminal when they are not connected to the control board. Remove the
short circuit, when reconnecting the control board. Do not touch the
pins of the device with your fingers.
Summary of Contents for AD1A008FBBNH
Page 138: ......
