Summary
Preface
P. 6
Chapter 2
P. 17
Technical data
Chapter 5
P. 76
Reception, storage
and installation
Chapter 4
P. 54
General information
Chapter 3
P. 47
Application notes
Chapter 6
P. 115
Options
Chapter 7
P. 129
Preventive maintenance
Chapter 1
P. 15
Overview
and installation diagram
Answer Drives 1000
55
4
4.2.1 CE MARKING
On AD1000 drives there is the CE mark to certify that the product
complies with the requirements of the Low Voltage European Directives
(Directive 73/23/EEC amended by Directive 98/68/EEC)
and Electromagnetic Compatibility (EMC) (Directive 89/336/EEC amended
by Directive 93/68/EEC)
The validity of the CE mark for EMC is subject to the use of the AD1000
in accordance with the recommendations of this manual.
4.2.2 UL CERTIFICATION
The AD series is certified for the US and Canada markets.
The AD1000 meets the requirements of UL certification if the following is
observed.
1. Use cables or copper bus bars in Class 1 65 / 75°C (140/167°F)
with the cross-section mentioned in this manual in accordance with
the drive size.
2. The power supply network capacity must not exceed the values shown
on Tables 5.4.1.1 and 5.4.1.2
3. The tightening torque and the cables cross-section relative
to the terminals are shown in chapter 5.
4. The distribution fuses size is indicated in chapter 5.
5. The cable connections must be made with ring cable lugs UL marked
and CSA certified. The cable lugs must be fixed by the clamp specified
by the manufacturer.
For the type of cable lugs see chapter 5.
6. The AD1000 drive provides motor overload protection adjustable
between 30% and 105% of motor rated current at full load.
For information about the setting of the tripping threshold at the time
of overload, etc. see paragraph 2.5 table 2.5.1.
7. The AD1000 drive provides overcurrent static protection at the
drive output and short-circuit on the DC side.
4.2.1 CE MARKING - 4.2.2
Summary of Contents for AD1A008FBBNH
Page 138: ......
