Summary
Preface
P. 6
Chapter 2
P. 17
Technical data
Chapter 5
P. 76
Reception, storage
and installation
Chapter 4
P. 54
General information
Chapter 3
P. 47
Application notes
Chapter 6
P. 115
Options
Chapter 7
P. 129
Preventive maintenance
Chapter 1
P. 15
Overview
and installation diagram
Answer Drives 1000
73
4
DANGER
The power supplies interruption procedure involves system or machine
parts outside the AD1000.
The procedure for disconnecting electricity to the AD1000 must be indicated
by another document to be provided by the system integrator and/or by the
user/customer who must indicate how to operate on those parts.
DANGER
The system integrator and/or installer is responsible to follow the
procedure that describes how to stop and secure the power supplies of
the AD1000 and what are the switching and disconnection devices, and
where they are positioned on the machine or system.
DANGER
Several actions described in these operating instructions have to be carried
out inside the AD1000.
Access is allowed only to qualified technicians, who are aware of the
electric shock risks, safety rules and regulatory regulations required. More
specifically technicians enabled to these tasks must have specific skills in the
electronic power drives sector.
Be authorized by the final system integrator to operate on the AD1000
on site.
• Be familiar with the safety concepts and always work according to
the installation site, applicable laws, safety regulations, and standard
regulations.
• Know the local power supply system in detail, in particular in input to
the AD1000 and output to the motor, the position and operation of the
switches (power-off) and of the disconnectors of the site in which the
equipment must work, the power sequences and grounding methods.
• Always keep available and have read and understood this manual
and wiring diagrams.
• Understand the functional sequences, especially those related to
the AD1000 start and stop, power on and power off and the power
parts disconnection sequence involving the AD1000
DANGER - RISK OF INAPPROPRIATE USE AND CONNECTION
A) Warning! Do not change any part of the AD1000.
Risk of death, fire, or heavy damage to personnel, may occur if any part of
the AD1000 is modified or tampered with.
B) Warning! The AD1000 must be properly grounded before connecting
any power source and operating the AD1000 itself.
• Do not disconnect any ground and/or connection wire.
• Regularly check the grounding during maintenance and always in case
of doubt.
4.8 ADDITIONAL DANGER REQUIREMENTS
Summary of Contents for AD1A008FBBNH
Page 138: ......
