Newport ESP300 Series, User Manual

Page: 111 / 314

HF
group off
IMM PGM MIP
USAGE
♦ ♦ ♦
SYNTAX xx HF or xx HF ?
PARAMETERS
Description
xx [ int ] - group number
Range
xx - 1 to MAX GROUPS
Units
xx - none
Defaults xx
missing: error 13, GROUP NUMBER MISSING
out of range: error 14, GROUP NUMBER OUT OF RANGE
not assigned: error 15, GROUP NUMBER NOT ASSIGNED
floating point: truncated
DESCRIPTION
This command turns power OFF of all axes assigned to a group. Refer MF
command to turn the power OFF of individual axes. The group power is
assumed to be OFF if power to any one of the axes in the group is OFF.
RETURNS
If “?” sign is issued along with command, the controller returns:
1 - group power is ON
0 - group power is OFF
REL. COMMANDS
HN - create a new group
HO - turn group power ON
EXAMPLE
1HN1,2 | create a new group (#1) with physical axes 1 and 2
1HO | turn group #1 power ON
1HF? | query group #1 power status
1 | controller returns a value of 1
1HF | turn group #1 power OFF
1HF? | query group #1 power status
0 | controller returns a value of 0
Section 3 – Remote Mode 3-71