- 89 -
NEW LEADER • NL5000G5 AGCO
www.New-Leader.com
(800) 363-1771
314520-AA-A
Page Rev. A
Header
Controller Operations
MACHINE CONFIGURATION
NOTE:
Refer to default settings table at end of controller section for factory setup defaults.
NOTE:
Before use, Display Monitor must be setup to enable VT connection and a machine configuration
may need to be built. See Manufacturer’s Operations Manual for detailed instructions on these
processes.
INITIAL CONFIGURATION/FACTORY SETUP
(Only seen on first boot, or if system is reset/reconfigured)
•
Power up Display Monitor and activate VT.
•
Alert screen appears identifying that system is not
configured. Press
to continue.
Overview of attached modules:
•
Number of spreader modules will be shown along with
any add on modules. Press
to continue.