- 96 -
www.New-Leader.com
(800) 363-1771
314520-AA-A
Page Rev. A
NEW LEADER • NL5000G5 AGCO
Header
Controller Operations
RECONFIGURE SYSTEM
NOTICE!
Pressing “Reset” under “System Settings will restore all settings to factory default and all
calibration numbers will be lost. It should only be pressed if instructed to do so by service
technician or New Leader product support.
•
Press
to reset/reconfigure system.
•
“Reconfigure” allows the user to adjust any of the
system settings made during first time start up
(“Machine Configuration” steps). “Reset” will restore
all settings to factory default and all calibration
numbers will be lost.
•
Display will then jump to GPS offset screen. See “GPS
Offsets” in this section for details.
