- 108 -
www.New-Leader.com
(800) 363-1771
314520-AA-A
Page Rev. A
NEW LEADER • NL5000G5 AGCO
Header
Controller Operations
CONVEYOR CALIBRATION
IMPORTANT!
For best results, a catch test must be done
for each product to be spread before
season begins, or any time a new supply
of product is received.
•
Press
to calibrate conveyor.
•
Manually enter cubic feet per revolution (CFR) rate
using keypad.
•
To begin catch test, press
for the bin to be
tested.
•
To perform in-field calibration, press
for the
bin to be tested.
WARNING
Do not work near rotating spinners.
Severe injury can result from contact
with moving parts.
•
Spinners will automatically shut off. For added safety,
disconnect PWM valves. Press
to continue.
•
Verify Feed Gate Height and Product Density are
correct. Use keypad to edit as needed. Enter Dispense
Amount using keypad. Press
to continue.
•
Bring engine up to full operating RPM.