- 63 -
NEW LEADER • NL5000G5 AGCO
www.New-Leader.com
(800) 363-1771
314520-AA-A
Page Rev. A
Header
Lubricant & Oil Specifications
HYDRAULIC SYSTEM
Use premium quality lubricants with 100-200 SUS or 20-43 cSt viscosity at operating temperatures. The hydraulic
fluid’s specifications in the table below are for normal operating conditions. Extreme environments or dirty conditions
may require the use of different oils. Consult your New Leader dealer or the Product Support Department at Highway
Equipment Company for systems operating outside normal conditions.
Ideal Oil Operating Temperature
115-158°F (46.11-70° C)
Recommended Premium Lubricant
Multi-Purpose Agriculture Hydraulic & Transmission Oil
Lubricant Specifications
Viscosity Index
Viscosity at 40°C, cst
Viscosity at 100°C, cst
Greater than 130
Less than 68
Greater than 9
Acceptable Fluid Example
Mobil 424
GEARCASE LUBRICANT
Fill the gearcase with non-corrosive type extreme pressure (E.P.)
gear oil conforming to MIL-L2105 B multi-purpose gear lubricating
oil requirements (API Service GL 4) based on ambient temperatures
listed below:
•
Single Pinion: 1 Pint (.50 L)
•
Dual Pinion, Planetary: 1.5 Pints (.70 L)
Ambient Temperature
Oil Type
Below 40°F (4.4°C)
SAE 80 E.P.
40° - 100° F (4.4° - 38° C)
SAE 90 E.P.
Above 100° F (38° C)
SAE 140 E.P.
GREASE GUN LUBRICANT
Use a waterproof ball and roller bearing lithium base lubricant with a minimum melting point of 300°F (150° C).
This lubricant should have a viscosity which assures easy handling in the pressure gun at prevailing atmospheric
temperatures. The grease should conform to NLGI No. 2 consistency.
CONVEYOR CHAIN OILER
Use a 75% diesel fuel and 25% SAE 10 oil mixture on the links and rollers.
NOTICE!
The lubricant distributor and/or supplier is to be held responsible for results obtained from their
products. Procure lubricants from distributors and/or suppliers of unquestionable integrity, supplying
known and tested products. Do not jeopardize your equipment with inferior lubricants. No specific
brands of oil are recommended. Use only products qualified under the following oil viscosity
specifications and classification recommended by reputable oil companies.
