- 129 -
NEW LEADER • NL5000G5 AGCO
www.New-Leader.com
(800) 363-1771
314520-AA-A
Page Rev. A
Header
Controller Operations
2.
Setup Bin Sequencing (Chaining):
A. Enable bin chaining for Bins 1 & 2, or Bins 3 & 4 as
applicable.
B. Select trigger type (Manual Only, Low Bin Threshold,
Low Bin Sensor, Container Reaches 0).
C. Select which bin to empty first by pressing arrow
button until arrow points to second bin to empty.
Figure at right shows Insert Bin emptying first and
Main Bin second; Micro Bin 2 emptying first and Micro
Bin 1 second.
Press
to continue.
A
B
C
3.
To manually switch bins:
•
When Bin Sequencing is enabled, Manual Override
button appears on Run Screen to force switchover to
next bin.
