48
BioFlo/CelliGen 115
y
M1369-0050
User’s Guide
BioFlo/CelliGen 115 System
Indication
Digital display in 0.1% increments
Range
0-200%
Control
PID, Cascade to Agitation, Gases, GasFlo if equipped with TMFC
DO
Sensor
Polargraphic DO probe
Filter
0.2
μ
m interchangeable cartridge
Exhaust
Condenser
Stainless steel, water-cooled in headplate
3 Pumps
Control
12 RPM
Water
10 PSIG maximum, 50
μ
m filtration
Utilities
Gases
10 PSIG maximum
120VAC
50/60 Hertz
Single phase
10 Amps
Electrical
requirements
230VAC
50/60 Hertz
Single phase
6 Amps
Control station/ Utility station
dimensions
With Exhaust Condenser
w/o Exhaust Condenser
Width
Depth
Height
Width
Height
Heat-
Blanketed
in cm in cm in cm in cm in cm
1.3L Vessel
9.5 24 8.5 22 22 56 8.5 22 16.5 42
3.0L Vessel
9.5 24 8.5 22 22 56 8.5 22 16.5 42
7.5L Vessel
14.5 37 11.5 29 23 65 11.5 29 19.5 49.5
14.0L Vessel
11.5 29
11.5 29 29 74 11.5 29 24 61
With Exhaust Condenser
w/o Exhaust Condenser
Width
Depth
Height
Width
Height
Water-
Jacketed
in
cm
in
cm
in
cm
in
cm
in
cm
1.3L Vessel
11.5 29 11.5 29 20.5 52 9.3 24 16 41
3.0L Vessel
11.5 29 11.5 29 22.5 56 9.3 24 18 45
7.5L Vessel
11.5 29 11.5 29 26.8 68 11.5 29 20.5 52
Dimensions
14.0L Vessel
11.5 29 11.5 29 31.5 80 11.5 29 26.5 67
Net Weight
Control
Station
Communications:
USB for easy firmware upgrades (Control station only)
BioCommand Port for communication with optional
BioCommand/SCADA software
Ethernet for future expansion
Certified to:
Conforms to:
UL Standard UL 61010-1
Regulatory
Compliance
c ETL us
CAN/CSA C22.2 No. 61010-1
Ambient Operating Conditions
10-35
°
C, up to 80% relative humidity, non-condensing
#
NOTE:
Specifications are subject to change without notice.
5.1 Certifications
The BioFlo/CelliGen 115 has been tested and meets the requirements of U.S. and
Canadian electrical and safety standards. And, as attested in the CE Declaration of
Conformity reproduced on the following page, they also conform to the appropriate
electrical and safety requirements set out in European Directives.
