96
BioFlo/CelliGen 115
y
M1369-0050
User’s Guide
When you have Cell Culture as the
Control Mode
and 4-Gas mix as the
Operating Mode
, the process loops are labeled Air (1)—as shown in Figure
41b—O2 (2), N2 (3) and CO2 (4). The loops’ numbers, 1, 2, 3 & 4,
correspond to the gas connections on the cabinet (
see Figure 1g
).
Figure 41b: Air (1) Gauge Screen with 4-Gas
There is also a GasFlo loop when one TMFC is present; settings in this loop’s
gauge screen turn the TMFC on and off and control the gas flow rate. The
GasFlo gauge screen (
see Figure 42
) allows you to set parameters for the
TMFC that controls this gas. The gauge screen for any of the gases allows you
to set parameters for the TMFC that controls the gas.
Figure 42: GasFlo Gauge Screen
