44
BioFlo/CelliGen 115
y
M1369-0050
User’s Guide
2.
Connect the exhaust condenser to the exhaust condenser port.
3.
Using flexible tubing, connect the exhaust filter to the top of the condenser.
Secure it with tubing ties.
4.
Insert the RTD into the thermowell.
5.
If you have not already done so, connect the sparge line (silicone tubing) to
the inlet filter.
WARNING!
Never block the exhaust to pressurize the vessel (see Section 4.6).
4.9
Main Power Switch
The main power switch is located on the righthand side of the control cabinet, as you
face the touchscreen (
see Figure 17
).
Be sure to read the CAUTION on the
following page before you turn the power on.
Figure 17: Main Power Switch
ON/OFF Main
Power Switch
ETHERNET port
(not in use at this time)
USB port
