54
BioFlo/CelliGen 115
y
M1369-0050
User’s Guide
Navigation Buttons
(for screen access)
Description
Summary
This screen is command central; it shows all your loops,
their current readings, setpoints and what has been
programmed for them.
Calibration
This screen allows you to calibrate the pH, DO & Level
probes and the gas flow.
Cascade
A cascade is a control function that uses the output of one
loop to influence the action and output of one or more other
loop(s). This screen allows you to set up cascades, to view
current settings, and to make changes to those settings.
Pumps
This screen gives you access to the Pump Gauges screen,
where the three pump gauges are displayed, providing both
current readings and the opportunity to change pump
settings.
Setup
This screen allows you to make changes to your system
settings, hardware setup & controller setup
6.2.4 Keypads
When an alphanumerical or a numerical keypad is needed for you to put information
into edit boxes, clicking in the edit box will open the required keypad (
see Figures 19e
& 19f
).
Figure 19e: Alphanumeric Keypad
This keypad is used to
designate a unit name.
What you type
on the keypad
appears here.
Pressing the
Clear
key clears the
entry without
closing the
keypad.
Pressing the
Cancel
key
clears the
entry and
closes the
keypad.
When you have finished typing the entry,
pressing the
OK
key saves the entry and
closes the keypad.
