12
BioFlo/CelliGen 115
y
M1369-0050
User’s Guide
Figure 1d: Control Station Service Connections
CAUTION!
Before making electrical connections, verify that the supply voltage
matches the voltage and the power requirements marked on the
electrical specification plate (located on the rear
panel of the cabinet)
and the control schematics supplied with the unit.
4.4
Connecting Utility Cabinets
If you have a control station and one or two utility stations, use the bus cable provided
in the following way:
Touchscreen,
gas and pump
control options
may or may not
be present,
depending
on the
configuration of
your control
station.
These connections are addressed in Section 4.5.2.
