manualshive.com logo in svg

NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Admin Manual, Page: 98 / 246

Share
Download
NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch Admin Manual Download Page 98

GS716Tv2 and GS724Tv3 Software Administration Manual

3-34

Configuring Switching Information

v1.0, July 2009

2.

Click 

Cancel 

to cancel the configuration on the screen and reset the data on the screen to the 

latest value of the switch.

3.

If you make any configuration changes, click 

Apply

 to apply the new settings to the switch. 

Configuration changes take effect immediately.

IGMP Snooping Interface Configuration

Use the IGMP Snooping Interface Configuration page to configure IGMP snooping settings on 
specific interfaces.

To access the IGMP Snooping Interface Configuration page:

1.

Click 

Switching



 Multicast 

 IGMP Snooping 

 IGMP Snooping Interface 

Configuration

 in the navigation tree. 

Figure

 

3-22

Table

 

3-20. IGMP Snooping Interface Configuration Fields

 

Field

Description

Interface

Lists all physical, VLAN, and LAG interfaces. Select the interface you 
want to configure. 

Admin Mode

Select the interface mode for the selected interface for IGMP Snooping 
for the switch from the menu. The default is 

Disable

.

Summary of Contents for GS716Tv2 - ProSafe Gigabit Managed Switch























































































































































































































































Reviews:

No comments