manualshive.com logo in svg

NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Admin Manual, Page: 110 / 246

Share
Download
NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch Admin Manual Download Page 110

GS716Tv2 and GS724Tv3 Software Administration Manual

3-46

Configuring Switching Information

v1.0, July 2009

1.

Click 

Switching



 Multicast 

 IGMP Snooping Querier 

 Querier VLAN Status 

in the 

navigation tree. 

Figure

 

3-29

Table

 

3-27. IGMP Snooping Querier VLAN Status Fields

 

Field

Description

VLAN ID

Specifies the VLAN ID on which the IGMP Snooping Querier is 
administratively enabled and for which VLAN exists in the VLAN 
database.

Operational State

Specifies the operational state of the IGMP Snooping Querier on a 
VLAN:
•

Querier

: The snooping switch is the querier in the VLAN. The 

snooping switch will send out periodic queries with a time interval 
equal to the configured querier query interval. If the snooping switch 
sees a better querier (numerically lower) in the VLAN, it moves to non-
querier mode.

•

Non-Querier

: The snooping switch is in non-querier mode in the 

VLAN. If the querier expiry interval timer expires, the snooping switch 
moves into querier mode.

•

Disabled

: The snooping querier is not operational on the VLAN. The 

snooping querier moves to disabled mode when IGMP snooping is not 
operational on the VLAN, when the querier address is not configured, 
or the network management address is not configured.

Operational Version

Displays the IGMP protocol version of the operational querier.

Last Querier Address

Displays the IP address of the last querier from which a query was 
snooped on the VLAN.

Summary of Contents for GS716Tv2 - ProSafe Gigabit Managed Switch























































































































































































































































Reviews:

No comments