manualshive.com logo in svg

NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Admin Manual, Page: 171 / 246

Share
Download
NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch Admin Manual Download Page 171

GS716Tv2 and GS724Tv3 Software Administration Manual

Managing Device Security

5-45

v1.0, July 2009

2.

Click 

Cancel

 to cancel the configuration on the screen and reset the data on the screen to the 

latest value of the switch.

3.

Click 

Apply

 to save any changes to the running configuration.

MAC Binding Table

Use the MAC Binding Table page to view or delete the MAC ACL bindings.

To display the MAC Binding Table:

Table

 

5-32. MAC ACL Rule Configuration Fields

 

Field

Description

ACL ID

Select an existing MAC ACL.

Direction

Specifies the packet filtering direction for ACL. The only valid direction 
is 

Inbound,

 which means the MAC ACL rules are applied to traffic 

entering the port.

Sequence Number

An optional sequence number may be specified to indicate the order of 
this access list relative to other access lists already assigned to this 
interface and direction. A low number indicates high precedence order. 
If a sequence number is already in use for this interface and direction, 
the specified access list replaces the currently attached access list 
using that sequence number. If the sequence number is not specified 
by the user, a sequence number that is one greater than the highest 
sequence number currently in use for this interface and direction will be 
used. Valid range is 1–4294967295.

Port Selection Table

Specifies list of all available valid interfaces for ACL binding. All non-
routing physical interfaces and interfaces participating in LAGs are 
listed.

Summary of Contents for GS716Tv2 - ProSafe Gigabit Managed Switch























































































































































































































































Reviews:

No comments