manualshive.com logo in svg

NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Admin Manual, Page: 51 / 246

Share
Download
NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch Admin Manual Download Page 51

GS716Tv2 and GS724Tv3 Software Administration Manual

Configuring System Information

2-19

v1.0, July 2009

Trap Configuration

This page displays an entry for every active Trap Receiver. To access this page, click 

System 

 

SNMP 

 SNMP V1/V2 

 Trap Configuration 

in the navigation tree. 

Table

 

2-10. Command Buttons

Field

Description

Add

Add the currently selected receiver configuration to the switch.

Delete

Delete the currently selected receiver configuration.

Cancel

Cancel the configuration on the screen. Reset the data on the screen to the 
latest value of the switch.

Apply

Sends the updated configuration to the switch. Configuration changes take 
effect immediately.

Figure

 

2-10

Table

 

2-11. SNMP Trap Configuration

 

Field

Description

Recipients IP

Enter the address in x.x.x.x format to receive SNMP traps from this device.

Version

Select the trap version to be used by the receiver from the pulldown menu.
•

SNMP v1

 - Uses SNMP v1 to send traps to the receiver.

•

SNMP v2

 - Uses SNMP v2 to send traps to the receiver.

Summary of Contents for GS716Tv2 - ProSafe Gigabit Managed Switch























































































































































































































































Reviews:

No comments