GS716Tv2 and GS724Tv3 Software Administration Manual
3-8
Configuring Switching Information
v1.0, July 2009
2.
Click
Cancel
to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
3.
If you make any changes to this page, click
Apply
to send the updated configuration to the
switch. Configuration changes take effect immediately.
LACP Configuration
To display the LACP Configuration page:
1.
Click
Switching
LAG
Advanced
LACP Configuration
in the navigation tree.
2.
Click
Refresh
to reload the page and display the most current information.
Port Selection Table
Select the ports as members of this LAG.
Current Members
Displays the LAGs on the current channel.
Figure
3-5
Table
3-5. LACP Configuration Fields
Field
Description
LACP System Priority
Specifies the device’s link aggregation priority relative to the devices at
the other ends of the links on which link aggregation is enabled. A
higher value indicates a lower priority. You can change the value of the
parameter globally by specifying a priority from 0–65535. The default
value is 32768.
Table
3-4. LAG Membership Fields (continued)
Field
Description