manualshive.com logo in svg

NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Admin Manual, Page: 61 / 246

Share
Download
NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch Admin Manual Download Page 61

GS716Tv2 and GS724Tv3 Software Administration Manual

Configuring System Information

2-29

v1.0, July 2009

Table

 

2-18. Local Port Information

 

Field

Description

Managed Address

Address SubType

Displays the type of address the management interface uses, such as an 
IPv4 address.

Address

Displays the address used to manage the device.

Interface SubType

Displays the port subtype.

Interface Number

Displays the number that identifies the port.

MAC/PHY Details

Auto-Negotiation 
Supported

Specifies whether the interface supports port-speed auto-negotiation. 
The possible values are True or False

Auto-Negotiation Enabled

Displays the port speed auto-negotiation support status. The possible 
values are True (enabled) or False (disabled).

Auto Negotiation 
Advertised Capabilities

Displays the port speed auto-negotiation capabilities such as 
1000BASE-T half-duplex mode or 100BASE-TX full-duplex mode.

Operational MAU Type

Displays the Medium Attachment Unit (MAU) type. The MAU performs 
physical layer functions, including digital data conversion from the 
Ethernet interface collision detection and bit injection into the network.

MED Details

Capabilities Supported

Displays the MED capabilities enabled on the port.

Current Capabilities

Displays the TLVs advertised by the port.

Device Class

Network Connectivity indicates the device is a network connectivity 
device.

Network Policies

Application Type

Specifies the media application type associated with the policy.

VLAN ID

Specifies the VLAN ID associated with the policy.

VLAN Type

Specifies whether the VLAN associated with the policy is tagged or 
untagged.

User Priority

Specifies the priority associated with the policy.

DSCP

Specifies the DSCP associated with a particular policy type.

Summary of Contents for GS716Tv2 - ProSafe Gigabit Managed Switch























































































































































































































































Reviews:

No comments