GS716Tv2 and GS724Tv3 Software Administration Manual
Maintenance
7-11
v1.0, July 2009
1.
Click
Maintenance
File Management
Dual Image
Dual Image Configuration
in the
navigation menu.
The Active Image page contains the following fields:
2.
Click
Activate
Image
to make the image that is selected in the
Image Name
field the next
active image for subsequent reboots.
3.
If the file you uploaded contains the boot loader code only, click
Update Bootcode
.
4.
Click
Refresh
to reload the page and display the most current information.
5.
Click
Delete
Image
to remove the selected image from permanent storage on the switch. You
cannot delete the active image.
Figure
7-6
Table
7-4. Dual Image Configuration Fields
Field
Description
Image Name
Select image1 or image2 from the drop down menu to display or configure
information about that software image.
Current Active
Displays name of current active image.
Image
Description
If desired, enter a descriptive name for the software image.
Note:
After activating an image, you must perform a system reset of the switch in
order to run the new code.