manualshive.com logo in svg

NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Admin Manual, Page: 95 / 246

Share
Download
NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch Admin Manual Download Page 95

GS716Tv2 and GS724Tv3 Software Administration Manual

Configuring Switching Information

3-31

v1.0, July 2009

STP Statistics

Use the Spanning Tree Statistics page to view information about the number and type of bridge 
protocol data units (BPDUs) transmitted and received on each port.

To display the Spanning Tree Statistics page:

1.

Click 

Switching 

 STP 

 Advanced 

 STP Statistics i

n the navigation tree. 

2.

Click 

Refresh

 to update the screen with the latest STP statistics information.

Figure

 

3-20

Table

 

3-18. Spanning Tree Statistics Fields

 

Field

Description

Interface

Select a physical or port channel interface to view its statistics.

STP BPDUs Received

Number of STP BPDUs received at the selected port.

STP BPDUs Transmitted

Number of STP BPDUs transmitted from the selected port.

RSTP BPDUs Received

Number of RSTP BPDUs received at the selected port.

RSTP BPDUs Transmitted

Number of RSTP BPDUs transmitted from the selected port.

MSTP BPDUs Received

Number of MSTP BPDUs received at the selected port.

MSTP BPDUs Transmitted

Number of MSTP BPDUs transmitted from the selected port.

Summary of Contents for GS716Tv2 - ProSafe Gigabit Managed Switch























































































































































































































































Reviews:

No comments