manualshive.com logo in svg

NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Admin Manual, Page: 78 / 246

Share
Download
NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch Admin Manual Download Page 78

GS716Tv2 and GS724Tv3 Software Administration Manual

3-14

Configuring Switching Information

v1.0, July 2009

4.

Click 

Cancel 

to cancel the configuration on the screen and reset the data on the screen to the 

latest value of the switch.

5.

If you make any changes to this page, click 

Apply 

to send the updated configuration to the 

switch. Configuration changes take place immediately.

Port VLAN ID Configuration

Use the Port VLAN ID (PVID) Configuration page to configure a virtual LAN on a port.

To access the Port PVID Configuration page:

1.

Click 

Switching



 VLAN 

 Advanced 

 Port PVID Configuration

 in the navigation tree. 

Untagged/Tagged Port 
Members

Click Untagged Port Members or Tagged Port Members to see the port 
list and use it to add the ports you selected to this VLAN. Each port has 
three modes:
•

Tagged

:

 

Select the ports on which all frames transmitted for this 

VLAN will be tagged. The ports that are selected will be included in 
the VLAN.

•

Untagged

:

 

Select the ports on which all frames transmitted for this 

VLAN will be untagged. The ports that are selected will be included in 
the VLAN.

VLAN Type

This field identifies the type of the VLAN you selected. Possible values 
are:
•

Default

: The default (VLAN ID = 1) is always present. 

•

Static

: A VLAN that you have configured using this screen.

Table

 

3-8. VLAN Membership Configuration Fields (continued)

Field

Description

Summary of Contents for GS716Tv2 - ProSafe Gigabit Managed Switch























































































































































































































































Reviews:

No comments