manualshive.com logo in svg

NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Admin Manual, Page: 208 / 246

Share
Download
NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch Admin Manual Download Page 208

GS716Tv2 and GS724Tv3 Software Administration Manual

7-2

Maintenance

v1.0, July 2009

1.

Click 

Maintenance 

 Reset 

 Device Reboot 

in the navigation tree.

2.

Click 

Cancel 

to cancel the configuration on the screen and reset the data on the screen to the 

latest value of the switch.

3.

Click 

Apply 

to send the updated configuration to the switch. Configuration changes take place 

immediately.

Reset Configuration to Defaults

Use the Factory Default page to reset the system configuration to the factory default values.

To access the Factory Defaults page:

Figure

 

7-1

Note: 

For information about configuring network information, see 

“Connecting the 

Switch to the Network” on page

 

1-1

.

Summary of Contents for GS716Tv2 - ProSafe Gigabit Managed Switch























































































































































































































































Reviews:

No comments