GS716Tv2 and GS724Tv3 Software Administration Manual
Configuring System Information
2-21
v1.0, July 2009
The fields available on the Trap Flags page depends on the packages installed on your system.
Figure
2-11
and the following table show the fields that are available on a system with all
packages installed.
2.
If you make any changes to this page, click
Apply
to send the updated configuration to the
switch. Configuration changes take effect immediately.
3.
Click
Cancel
to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
SNMP v3 User Configuration
This is the configuration for SNMP v3.
To access this page:
1.
Click
System
SNMP
SNMP V3
User Configuration
in the navigation menu.
Figure
2-11
Table
2-13. Trap Flags Configuration Fields
Field
Description
Authentication
Enable or disable activation of authentication failure traps by selecting the
corresponding button. The factory default is enabled.
Link Up/Down
Enable or disable activation of link status traps by selecting the
corresponding button. The factory default is enabled.
Spanning Tree
Enable or disable activation of spanning tree traps by selecting the
corresponding button. The factory default is enabled.