manualshive.com logo in svg

NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Admin Manual, Page: 41 / 246

Share
Download
NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch Admin Manual Download Page 41

GS716Tv2 and GS724Tv3 Software Administration Manual

Configuring System Information

2-9

v1.0, July 2009

Table

 

2-4. SNTP Global Configuration Fields

 

Field

Description

Version

Specifies the SNTP Version the client supports.

Supported Mode

Specifies the SNTP modes the client supports. Multiple modes may be 
supported by a client.

Last Update Time

Specifies the local date and time (UTC) the SNTP client last updated 
the system clock.

Last Attempt Time

Specifies the local date and time (UTC) of the last SNTP request or 
receipt of an unsolicited message.

Last Attempt Status

Specifies the status of the last SNTP request or unsolicited message for 
unicast mode. If no message has been received from a server, a status 
of Other is displayed. These values are appropriate for all operational 
modes:
•

Other: 

None of the following enumeration values.

•

Success: 

The SNTP operation was successful and the system time 

was updated.

•

Request Timed Out: 

A directed SNTP request timed out without 

receiving a response from the SNTP server.

•

Bad Date Encoded: 

The time provided by the SNTP server is not 

valid.

•

Version Not Supported: 

The SNTP version supported by the server 

is not compatible with the version supported by the client.

•

Server Unsynchronized: 

The SNTP server is not synchronized with 

its peers. This is indicated via the 'leap indicator' field on the SNTP 
message.

•

Server Kiss Of Death: 

The SNTP server indicated that no further 

queries were to be sent to this server. This is indicated by a stratum 
field equal to 0 in a message received from a server.

Server IP Address

Specifies the IP address of the server for the last received valid packet. 
If no message has been received from any server, an empty string is 
shown.

Address Type

Specifies the address type of the SNTP Server address for the last 
received valid packet.

Server Stratum

Specifies the claimed stratum of the server for the last received valid 
packet.

Reference Clock Id

Specifies the reference clock identifier of the server for the last received 
valid packet.

Server Mode

Specifies the mode of the server for the last received valid packet.

Summary of Contents for GS716Tv2 - ProSafe Gigabit Managed Switch























































































































































































































































Reviews:

No comments