manualshive.com logo in svg

NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Admin Manual, Page: 13 / 246

Share
Download
NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch Admin Manual Download Page 13

Tip: 

This format is used to highlight a procedure that will save time or resources.

Warning: 

A caution provides information about critical aspects of the configuration, 

combination of settings, events, or procedures that can adversely affect 
network connectivity, security, and so on.

Danger: 

This is a safety warning. Failure to take heed of this notice may result in 

personal injury or death.

GS716Tv2 and GS724Tv3 Software Administration Manual

xiii

v1.0, July 2009

•

Scope. 

This manual is written for the Smart Switch according to these specifications:

Product Version

GS716T and GS724T Gigabit Smart Switch 

Manual Publication Date

July 2009 

Note: 

Product updates for the GS716T are available on the NETGEAR, Inc. website at 

http://kb.netgear.com/app/products/list/p3/322. 

Product updates for the GS724T are available on the NETGEAR, Inc. website at 

http://kb.netgear.com/app/products/list/p3/322.

Summary of Contents for GS716Tv2 - ProSafe Gigabit Managed Switch























































































































































































































































Reviews:

No comments