manualshive.com logo in svg

NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Admin Manual, Page: 59 / 246

Share
Download
NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch Admin Manual Download Page 59

GS716Tv2 and GS724Tv3 Software Administration Manual

Configuring System Information

2-27

v1.0, July 2009

Local Information

Use the LLDP Local Information page to view the data that each port advertises through LLDP.

To display the LLDP Local Device Information page:

1.

Click 

System



Advanced 



LLDP



Local Information

 in the navigation tree. 

 

 

Figure

 

2-15

Table

 

2-17. LLDP Local Information Fields

 

Field

Description

Chassis ID Subtype

Identifies the type of data displayed in the 

Chassis ID

 field

Chassis ID

Identifies the 802 LAN device's chassis.

System Name

Identifies the system name associated with the remote device. To 
configure the System Name, see 

“System Information” on page

 

2-1

. 

System Description

Specifies the description of the selected port associated with the local 
system.

System Capabilities 

Specifies the system capabilities of the local system.

Interface

Select the interface with the information to display.

Port ID Subtype

Identifies the type of data displayed in the 

Port ID

 field.

Port ID

Identifies the physical address of the port.

Summary of Contents for GS716Tv2 - ProSafe Gigabit Managed Switch























































































































































































































































Reviews:

No comments