GS716Tv2 and GS724Tv3 Software Administration Manual
Monitoring the System
6-21
v1.0, July 2009
Trap Logs
Use the Trap Logs page to view information about the SNMP traps generated on the switch.
To access the Trap Logs page:
1.
Click the
Monitoring
Logs
tab, and then click the
Trap Logs
link.
The page also displays information about the traps that were sent.
Figure
6-8
Table
6-11. Trap Log Statistics
Field
Description
Number of Traps
Since Last Reset
The number of traps that have occurred since the switch last reboot.
Trap Log Capacity
The maximum number of traps stored in the log. If the number of traps
exceeds the capacity, the entries will overwrite the oldest entries.
Number of Traps
Since Log Last
Viewed
The number of traps that have occurred since the traps were last displayed.
Displaying the traps by any method (such as terminal interface display, Web
display, or upload file from switch) will cause this counter to be cleared to 0.