manualshive.com logo in svg

NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Admin Manual, Page: 57 / 246

Share
Download
NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch Admin Manual Download Page 57

GS716Tv2 and GS724Tv3 Software Administration Manual

Configuring System Information

2-25

v1.0, July 2009

 

 

Figure

 

2-14

Table

 

2-16. LLDP Port Settings Fields

 

Field

Description

Interface

Specifies the port to be affected by these parameters.

Admin Status

Select the status for transmitting and receiving LLDP packets. The 
options are:
• Tx Only: Enable only transmitting LLDP PDUs on the selected ports.
• Rx Only: Enable only receiving LLDP PDUs on the selected ports.
• Tx and Rx: Enable both transmitting and receiving LLDP PDUs on the 

selected ports.

• Disabled: Do not transmit or receive LLDP PDUs on the selected 

ports.

Management IP Address

Choose whether to advertise the management IP address from the 
interface. The possible field values are:
• Stop Advertise: Do not advertise the management IP address from the 

interface.

• Auto Advertise: Advertise the current IP address of the device as the 

management IP address.

Summary of Contents for GS716Tv2 - ProSafe Gigabit Managed Switch























































































































































































































































Reviews:

No comments