GS716Tv2 and GS724Tv3 Software Administration Manual
2-4
Configuring System Information
v1.0, July 2009
2.
To access the switch over a network, you must first configure it with IP information (IP
address, subnet mask, and default gateway). You can configure the IP information using any of
the following options:
•
Dynamic IP Address (DHCP)
•
Dynamic IP Address (BOOTP)
•
Static IP Address
Figure
2-2
Table
2-2. Network Connectivity Fields
Field
Description
IP Address
The IP address of the network interface. The factory default value is
192.168.0.239.
Note
: Each part of the IP address must start with a number other than
zero. For example, IP addresses 001.100.192.6 and 192.001.10.3 are
not valid.
Subnet Mask
The IP subnet mask for the interface. The factory default value is
255.255.255.0.
Default Gateway
The default gateway for the IP interface. The factory default value is
192.168.0.1.
Management VLAN ID
Specifies the management VLAN ID of the switch. The range is 1–4093.
The management VLAN is used for management of the switch.