GS716Tv2 and GS724Tv3 Software Administration Manual
Managing Device Security
5-31
v1.0, July 2009
1.
Click
Security
Traffic Control
, and then click the
MAC Filter
MAC Filter
Configuration
link.
Figure
5-18
Table
5-20. Switch Configuration Fields
Field
Description
MAC Filter
This is the list of MAC address and VLAN ID pairings for all configured filters. To
change the port mask(s) for an existing filter, select the entry you want to
change. To add a new filter, select “Create Filter” from the top of the list
VLAN ID
The VLAN ID used with the MAC address to fully identify packets you want
filtered. You can only change this field when you have selected the “Create
Filter” option.
MAC Address
The MAC address of the filter in the format 00:01:1A:B2:53:4D. You can only
change this field when you have selected the “Create Filter” option.
You cannot define filters for these MAC addresses:
• 00:00:00:00:00:00
• 01:80:C2:00:00:00 to 01:80:C2:00:00:0F
• 01:80:C2:00:00:20 to 01:80:C2:00:00:21
• FF:FF:FF:FF:FF:FF
Source Port
Members
Click the orange bar to display the available ports. Select the ports you want
included in the inbound filter. If a packet with the MAC address and VLAN ID
you selected is received on a port that is not in the list, it will be dropped.
Destination Port
Members
Click the orange bar to display the available ports. Select the ports you want
included in the outbound filter. Packets with the MAC address and VLAN ID you
selected will only be transmitted out of ports that are in the list. Destination ports
can be included only in the Multicast filter.