manualshive.com logo in svg

NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Admin Manual, Page: 121 / 246

Share
Download
NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch Admin Manual Download Page 121

GS716Tv2 and GS724Tv3 Software Administration Manual

Configuring Quality

 of

 Service

4-3

v1.0, July 2009

2.

If you change any of the settings on the page, click 

Apply

 to send the updated configuration to 

the switch.

CoS Interface Configuration

Use the CoS Interface Configuration page to apply an interface shaping rate to all ports or to a 
specific port.

To display the CoS Interface Configuration page:

1.

Click the 

QoS 

 CoS 

tab, and then click the 

Advanced 

 CoS Interface Configuration

 link.

Table

 

4-1. Basic CoS Configuration Fields

 

Field

Description

Global

Select the Global option to apply the same trust mode to all CoS 
configurable interfaces. 

Global Trust Mode

Specifies whether or not all interfaces trust a particular packet marking 
when the packet enters the port. The default value is trust 802.1p. The 
mode can only be one of the following:
• Untrusted
• 802.1p
• DSCP

Interface

The menu contains all CoS configurable interfaces. Select an individual 
interface from the menu to override the global settings on a per-
interface basis.

Interface Trust Mode

Specifies whether or not an interface trusts a particular packet marking 
when the packet enters the port. The default value is trust 802.1p. The 
mode can only be one of the following:
• Untrusted
• 802.1p
• DSCP

Summary of Contents for GS716Tv2 - ProSafe Gigabit Managed Switch























































































































































































































































Reviews:

No comments