NEC ViVid Office 2020 Quick Reference Manual Download Page 67

Page: 67 / 188

Confirming the Results of Transmission, Status of Printing Jobs, and Saved Documents (Job List)

1-35

Getting Star

ted

Touch [Type].

Confirm the Transmission Status.

Confirming the status

Touch [

↓

] and [

↑

] to locate the desired

document and to confirm the trans-
mission status.

When [Interim Rep.] is displayed

If [Interim Rep.] is touched while a
document is being scanned or trans-
mitted, a serial broadcast report is
printed.

When [Delete] is displayed

If [Delete] is touched when there is a
document awaiting transmission, the
transmission is cancelled.

When timer icon (

) is displayed

If timer transmission is set, the timer
icon (

) is displayed to the right of

the reception date and time.

Time to hold the incomplete trans-
mission data

The length of time to hold the incom-
plete transmission data can be set.
Refer to Operation Manual (Fax).

Touch [OK].

The display returns to the stand-by
screen (initial screen).

Touch [Job List].

Touch [Type].

Touch [RX Doc.].

ADD.

Confirming the Reception Status

Summary of Contents for ViVid Office 2020





























































































































































































Search results

Summary of Contents for ViVid Office 2020

Reviews:

Related manuals for ViVid Office 2020

Brands by name

Popular brands

NEC ViVid Office 2020, Quick Reference Manual

Search results

Summary of Contents for ViVid Office 2020

Reviews:

Related manuals for ViVid Office 2020

Brands by name

Popular brands