NEC ViVid Office 2020 Quick Reference Manual Download Page 89

Page: 89 / 188

Basic Copy Operations

2-3

Basic Operations

Confirm Accepted Time and Job Num-
ber, and touch [OK].

Copying now begins.

Copying begins even if [OK] is not
touched.

To Stop Copying

Press <Stop> to cease copying.
Refer to

"Quitting an Operation" on

page 1-30

If memory is full

Retry copying after a while.
If paper is empty, refill the trays as
needed.

Open the Document Cover and place
the document on the glass surface.

Refer to

"Handling Documents" on page

1-25

Close the Document Cover.

Press <Copy>.

Use the 10-key Pad to enter the number
of copies.

Change the number of copies by
pressing <C> (Clear key).
Up to 999 copies can be made.

Press <Start>.

ADD.

Copying with the Book Scanner

REF.

ADD.

Summary of Contents for ViVid Office 2020





























































































































































































Search results

Summary of Contents for ViVid Office 2020

Reviews:

Related manuals for ViVid Office 2020

Brands by name

Popular brands

NEC ViVid Office 2020, Quick Reference Manual

Search results

Summary of Contents for ViVid Office 2020

Reviews:

Related manuals for ViVid Office 2020

Brands by name

Popular brands