NEC ViVid Office 2020 Quick Reference Manual Download Page 106

Page: 106 / 188

3-4

Printing the RX Report

(RX Report)

Press <Utility/Counter>.

Touch [Print Lists].

Touch [RX Report].

Touch [OK].

The RX Report is printed.

The report is automatically printed out
even if [OK] is not touched.

The RX Report can be used to check the document number, RX start time, duration, destination, communication
mode, number of pages printed, and reception result.

Before Starting
Operations

●

This section describes how to manually print out the report.

●

The function for automatically printing out this report can be set.

Printing the RX Report

ADD.

Summary of Contents for ViVid Office 2020





























































































































































































Search results

Summary of Contents for ViVid Office 2020

Reviews:

Related manuals for ViVid Office 2020

Brands by name

Popular brands

NEC ViVid Office 2020, Quick Reference Manual

Search results

Summary of Contents for ViVid Office 2020

Reviews:

Related manuals for ViVid Office 2020

Brands by name

Popular brands