NEC ViVid Office 2020 Quick Reference Manual Download Page 58

Page: 58 / 188

Handling Documents

1-26

Longer side against the back.

Place the book, magazine, etc. in the top left-hand corner.

Open the Document Cover and place the document face down and flush with the glass
surface.

Position the document in the top left-hand corner of the glass surface.

For transmission, the document should be placed with its longer side against the back
edge of the glass surface. If placed with the shorter side against the back, the entire
document may be reduced when transmitted.

Close the Document cover before beginning transmission or copying.

Shorter side against the back.

Using the Book Scanner

Summary of Contents for ViVid Office 2020





























































































































































































Search results

Summary of Contents for ViVid Office 2020

Reviews:

Related manuals for ViVid Office 2020

Brands by name

Popular brands

NEC ViVid Office 2020, Quick Reference Manual

Search results

Summary of Contents for ViVid Office 2020

Reviews:

Related manuals for ViVid Office 2020

Brands by name

Popular brands