NEC ViVid Office 2020 Quick Reference Manual Download Page 68

Page: 68 / 188

Confirming the Results of Transmission, Status of Printing Jobs, and Saved Documents (Job List)

1-36

Confirm the Reception Status.

Confirming the status

Touch [

↓

] and [

↑

] to retrieve the

desired document, and confirm the
reception status.

To delete the document awaiting
Polling Reception

Touch [Delete].

Touch [OK].

The display returns to the stand-by
screen (initial screen).

Touch [Job List].

Touch [Doc.].

(Case where the optional Fax Kit is not installed)

(Case where the optional Fax Kit is installed)

Select particular documents.

[Bulletin] is available with the optional
Fax Kit installed.

Touch [Bulletin].

Select the document to be confirmed.

ADD.

Confirming the Saved Documents

Confirming the documents in the bulletin
board

ADD.

Summary of Contents for ViVid Office 2020





























































































































































































Search results

Summary of Contents for ViVid Office 2020

Reviews:

Related manuals for ViVid Office 2020

Brands by name

Popular brands

NEC ViVid Office 2020, Quick Reference Manual

Search results

Summary of Contents for ViVid Office 2020

Reviews:

Related manuals for ViVid Office 2020

Brands by name

Popular brands