NEC ViVid Office 2020 Quick Reference Manual Download Page 126

Page: 126 / 188

4-10

Installing and Replacing the Spare Transmis-
sion (TX) Marker Stamp

This procedure illustrates how to install and replace the TX Marker Stamp.

Before Starting
Operations

●

To use TX Marker Stamp, the optional Automatic Document Feeder (ADF) is required.

●

A spare TX Marker Stamp is required.

●

The spare TX Marker Stamp is a consumable part. Replacement markers must be pur-
chased from the dealer who sold this machine.

Installing and Replacing the Spare TX Marker Stamp (Option)

Pull the lever and lift the Document Feeder
Cover.

Pull the lever (the one that is at the front of the
Document Guide) and open the Document
Guide Plate.

Pick up the used Marker by pinching the part
above the round pin of the stamp with a pair of
tweezers.

Insert the new Marker in place.

Summary of Contents for ViVid Office 2020





























































































































































































Search results

Summary of Contents for ViVid Office 2020

Reviews:

Related manuals for ViVid Office 2020

Brands by name

Popular brands

NEC ViVid Office 2020, Quick Reference Manual

Search results

Summary of Contents for ViVid Office 2020

Reviews:

Related manuals for ViVid Office 2020

Brands by name

Popular brands