NEC ViVid Office 2020 Quick Reference Manual Download Page 120

Page: 120 / 188

Installing Print Paper

4-4

Changing the Paper Size

Pull out the paper tray.

Press the spring loaded lift plate until a click-
ing sound is made.

Adjust the paper width guide to the desired
width of the paper by pinching with your fin-
gers.

Hold the paper length guide and slide the
guide to the desired length.

Insert a ream of paper into the tray, adjust the
paper length/width guide properly to paper
size.
Do not exceed the maximum load. This maxi-
mum is indicated by a mark on the paper
guide.

Push in the paper tray and replace the paper
size label to reflect the size currently installed.

Maximum paper
load indication

Summary of Contents for ViVid Office 2020





























































































































































































Search results

Summary of Contents for ViVid Office 2020

Reviews:

Related manuals for ViVid Office 2020

Brands by name

Popular brands

NEC ViVid Office 2020, Quick Reference Manual

Search results

Summary of Contents for ViVid Office 2020

Reviews:

Related manuals for ViVid Office 2020

Brands by name

Popular brands