B-2 System Specifications
Processor Mounting
Processor subsystem inserts into Slot 1 on the system
board.
A 242-pin edge connector is implemented on the
processor card for system board installation.
Each end of Slot 1 has a Retention Mechanism Attach
Mount (RMAM) inserted through the board. RMAM is
made of two studs connected with a bridge.
Retention Mechanism (RM) is inserted over Slot 1 to act
as an insertion guide and prevent movement of processor
after subsystem mounting.
RM is attached to RMAM by 4 captive nuts held to the
guide with fasteners.
For thermal protection, a heatsink is supported by a
Heat Sink Support (HSS), which is attached to the
system board by two push pins.
The heatsink is secured in place to the HSS by an HSS
top bar.
The top bar is snapped into rigid pins after the processor
subsystem (with heatsink) is inserted into the Slot 1
connector and RM.
Network Subsystem
The Local Area Network (LAN) subsystem consists of the
following three devices mounted on the system board:
Intel 82557 LAN controller chip
Intel 82555 physical layer interface
Remote Wake Up controller.
Summary of Contents for POWERMATE ENTERPRISE - 10-1997
