Installing Options 5-19
Installing an Expansion Board
To install an expansion board in the system, perform the
following steps.
1.
Remove the system unit cover (see “Removing the
System Unit Cover”).
2.
Follow any preinstallation instructions that come with
the expansion board (such as setting switches or jumpers
on the board).
NOTE
Before installing the expansion board in the
minitower chassis, you must remove the AGP Video
board (if installed) and the chassis floor (see the
sections “AGP Video Board Removal” and
“Minitower Stand and Chassis Floor Removal and
Replacement”).
3.
Remove the screw securing an expansion slot cover (see
the following figures). Set the screw aside (it will be
used to secure the expansion board).
4.
Remove the slot cover. Save it to cover the slot again in
case the expansion board is removed.
!
CAUTION
A slot cover can damage the system board or any
option board if it falls into the system. Take care to
keep the slot cover from falling when removing the
screw.
If the slot cover does fall into the unit, remove it
before replacing the cover.
Summary of Contents for POWERMATE ENTERPRISE - 10-1997
