manualshive.com logo in svg

NEC POWERMATE ENTERPRISE - 10-1997, Manual

Share
Download
NEC POWERMATE ENTERPRISE - 10-1997 Manual Download Page 77

    

 3-14   Understanding System Features

Plug and Play Support

 Your computer comes with a Plug and Play BIOS which
supports Plug and Play technology. Plug and Play
eliminates complicated setup procedures for installing Plug
and Play expansion boards.

 With Plug and Play technology, you add a Plug and Play
expansion board simply by powering off the system,
installing the board, and powering on the system. There are
no jumpers to set and no system resource conflicts to
resolve. Plug and Play automatically configures the board
for your system.

 Your system also supports non-Plug and Play boards.

Power Saving Feature

 A suspend button lets you quickly put the system into a full
power reduction mode of operation. This is a convenient
way to save power when you need to be away from your
computer for a short period of time. Press a key or move the
mouse and your system quickly returns to full power and to
where you left off.

Summary of Contents for POWERMATE ENTERPRISE - 10-1997















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands